3D Print Shrinkage Calculator
Calculate the shrinkage of 3D prints with FDM technology.
Filament Shrinkage Calculator
For OrcaSlicer & BambuSlicer (using Calibration Cross)
Instructions
- Load the calibration model: Multi-Measurement-Calibration-Cross.stl.
- Print the model with 100% shrinkage and 0mm XY Compensation.
- Let the print cool completely, then measure it carefully with calipers.
- Enter your 8 measured values below and click "Calculate".
Please enter valid measured values for all 8 fields.
Your OrcaSlicer Values
Where to put these values in OrcaSlicer:
Go to: Filament Settings → Filament tab
- Paste the Shrinkage value into the "Shrinkage" field.
- Paste the X-Y Contour Compensation value into the "X-Y contour compensation" field (under the Compensation section).
Feedback
Was this page helpful?
Glad to hear it! Please tell us how we can improve.
Sorry to hear that. Please tell us how we can improve.